Factory Price Forklift Driving Axle Case for Heli Lonking and JAC

Product Description
Product Title: Forklift driving axle case
Product Model: QDQ-A22J3-02021-AH Forklift driving axle case

Forklift Driving Axle Case Inspection and Repair

Inspecting forklift driving axle case regularly is strongly recommended when you do the overhaul for your forklift lift, here is checking requirements:
 

• The misalignment of the inner and outer bearing brackets at both ends of the forklift driving axle housing should not exceed 0.01mm; the vertically error of the bearing seat neck and its thrust end face not exceed 0.05mm;
• The bearing seat neck should be perpendicular to the edge plane of the brake base plate, and the vertically error should be no more than 0.1mm.
• Screw hole thread damage should not be more than 2 deduction, more than when can be repaired or welded repair.
• When the oil seal wear exceeds 0.15mm,it can be repaired.
• When the shaft journal wear of the axle shaft sleeve rolling bearing is greater than 0.04mm,it can be chrome plated or surfacing repair.
• When axle bushings have cracks and defects of any nature, it should be replaced.

• The wear of the inner and outer end bracket holes of the forklift driving axle case driver shaft sleeve shall not be greater than 0.06mm, otherwise, the driving axle sleeve journal can be chrome plated or expanded to a repair size.
• When the drive axle housing is broken, it should be replaced.
• The wear of the inner and outer end bracket holes of the forklift driving axle housing half shaft sleeve shall not be greater than 0.06mm, otherwise, the axle sleeve journal can be chrome plated or expanded to a repair size.
• When the drive axle housing is cracked, it should be replaced.